Teac DM-24 Basics Manual Manual do Utilizador

TASCAM TEAC Professional DivisionDM-24Digital Mixing console The DM-24 Basics

On channels 1-32 you can program a different MIDI channel and MIDI controllernumber for the fader, mute key and pan knob. On the master layer you can

output simultaneously. The control room and studio outputs on the cascadeslave could be used to feed different monitors systems. Use the cascade mas

• AES/EBU can be input or output in DUAL LINE (HI SPEED will be supportedin a future version of firmware.) The IF-AE/DM AES/EBU option cardsupports

DM-24 SIGNAL FLOW ... 3INPUTS ...

DM-24 SIGNAL FLOWThe first 24 channels of the DM-24 can accept “INPUTS” or “RETURNS.” Theseassignments are made on the I/O page. Use the cursor keys

TDIF 3 or ADATOnce the preferred “return” interfaces have been selected, they can be assignedto channels 1-24 in groups of eight. For instance:Slot 1

• The IF-CS/DM is a cascade card. To cascade two DM-24s, you must putone cascade card in “SLOT 1” of each DM-24. See the section on“cascading two

available to use as tape returns. This presents a problem. Here are a few waysto deal with this scenario:Using AUX 1&2 as the tape return pathThe

plugging this signal into the MX-2424 will register 6dB less then if a “balanced”signal were sent to it.To use this solution with other recorders we r

AUTOMATIONThe DM-24 features very powerful, internal automation. No computer required.The internal automation of the DM-24 is actually more powerful

The idea behind the automation is “power without interference.” When you’remixing, you want to be thinking about your mix not trying to remember the